{"product_id":"6-4l-powerstroke-cylinder-head-new-casting-machined-in-house-2008-2010","title":"6.4L Powerstroke Cylinder Head — New Casting, Machined In-House (2008-2010)","description":"\u003cp\u003e\u003cstrong\u003ePrice is for one head. Not a pair.\u003c\/strong\u003e Most 6.4 jobs need two — order quantity 2 if you're doing the whole engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Survive What Stock Never Could\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour 6.4's factory head gasket design is the #1 point of failure under boost, towing load, or a tune. We fixed that.\u003c\/p\u003e\n\u003cp\u003eWe start with a brand-new casting — never been in an engine, never heat-cycled, no core to send back and no core charge to eat. Then it gets machined and assembled in our own shop. Not a reman head pulled off a shelf and repainted. Not somebody else's cracked casting cleaned up and sold as new.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eO-ringed or Non-O-ringed — your call.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose O-ringed and we machine a receiver groove into the deck and set stainless wire in it, driving clamping pressure into the gasket and locking it in place. That's what ends the blown head gasket cycle for good — no more coolant in the oil, no more overheating, no more guessing. It's what you want if you're running a tune, spraying, pulling, or making real boost.\u003c\/p\u003e\n\u003cp\u003eChoose non-O-ringed for a factory-style replacement on a stock or lightly tuned truck. Same casting, same machine work, same standard — just set up for stock cylinder pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for how you actually use the truck:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTowing heavy\u003c\/strong\u003e — gooseneck, bumper pull, hotshot, anything that lays into the EGTs on a grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet trucks running a tune\u003c\/strong\u003e — the 6.4 lifts heads early once you turn the fuel up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and sled pull\u003c\/strong\u003e — high cylinder pressure, repeated heat cycles, no room for a lifting head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaily drivers\u003c\/strong\u003e you're done wrenching on\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Done to Every Head:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision O-ring option for increased head gasket clamping pressure and a bulletproof seal under high cylinder pressure\u003c\/li\u003e\n\u003cli\u003eNew valve guides, sized and finished — no sloppy tolerances, no oil consumption issues\u003c\/li\u003e\n\u003cli\u003eNew valve seats, cut true and sealed for a bulletproof compression seal\u003c\/li\u003e\n\u003cli\u003eNew valve seals to keep oil out of the combustion chamber\u003c\/li\u003e\n\u003cli\u003eUpgraded valve springs for improved durability and consistent valve control under high RPM and high boost\u003c\/li\u003e\n\u003cli\u003eComplete valve job — every valve hand-lapped and pressure tested\u003c\/li\u003e\n\u003cli\u003eSurfaced true and flat on precision machining equipment\u003c\/li\u003e\n\u003cli\u003eFinished in heat-resistant paint to fight corrosion and handle the heat cycle abuse these engines see\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBeyond gasket integrity, a properly set up head means better airflow and improved fuel atomization — better combustion, better power delivery, better efficiency.\u003c\/p\u003e\n\u003cp\u003eEvery head that comes through our shop is machined in-house on our own equipment — the same shop we bought specifically because we weren't satisfied with what was available on the market. If it doesn't meet our standard, it doesn't go out the door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrder in pairs.\u003c\/strong\u003e If one head let go, the other one lived through identical heat cycles. Doing one and reusing the other is how people end up pulling this cab twice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for guys running a tune, towing heavy, or done replacing head gaskets every 60K miles. This is the last head gasket job you'll ever do.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these new or remanufactured?\u003c\/strong\u003e\u003cbr\u003eNew castings. They've never been installed in an engine. We machine and assemble them here — you're buying our machine work on a brand-new part, not a refurbished used one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to send in a core?\u003c\/strong\u003e\u003cbr\u003eNo. No core charge, no core return, nothing to ship back. What you order is what you keep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you O-ring these?\u003c\/strong\u003e\u003cbr\u003eYour choice — select O-ringed or non-O-ringed above. O-ringed adds a machined receiver groove and stainless wire for maximum clamping pressure, and it's what we recommend for any truck running a tune or towing heavy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are these different from other new-casting heads?\u003c\/strong\u003e\u003cbr\u003eMost new-casting heads on the market are machined by a contract shop and sold under somebody's brand. Ours are cut in our own building, on our own equipment, by our own people — and we'll tell you the exact specs we hold. Call us and ask. Try that anywhere else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fix my head gasket problem?\u003c\/strong\u003e\u003cbr\u003eOnly if you stud the engine and fix what caused the overheat. New heads on a truck with a cooling system problem will fail again. Call us before you buy and we'll talk through what you're actually chasing.\u003c\/p\u003e","brand":"Powerhouse Diesel","offers":[{"title":"Standard Non-Oringed","offer_id":50164484604042,"sku":"sku-49767507919098","price":1000.0,"currency_code":"USD","in_stock":true},{"title":"O-Ringed","offer_id":50164484636810,"sku":"sku-49767507951866","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/5548\/8394\/files\/image1_12_0d6d784b-2c5b-487b-b174-836fe03dc2aa.jpg?v=1788910836","url":"https:\/\/pistontwistin.org\/products\/6-4l-powerstroke-cylinder-head-new-casting-machined-in-house-2008-2010","provider":"Piston Twistin LLC","version":"1.0","type":"link"}