Powerhouse Diesel

FASS Plug N Play Titanium Signature Series Plus Fuel System with S&B Sending Unit, 100 GPH | 2013 to 2018 Ram Cummins and 2019 to 2020 with CP3 | PNPTSPD07100G

Write Review
Limited-Time Offer
DIESEL2025 | Copy
00 d
:
00 h
:
00 m
Sale price $1,099.00 USD Regular price $1,156.84 USD
5% off
Tax included. Shipping calculated at checkout.
SKU: FASSPNPTSPD07100G
The FASS Plug N Play PNPTSPD07100G pairs a 100 GPH Titanium Signature Series Plus system with an S&B fuel sending unit, so the whole install plugs in. You get the...
$1,099.00 USD
Payment and security

Your payment information is processed securely.

  • Amazon
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Satispay
  • Shop Pay
  • USDC
  • Visa

The FASS Plug N Play PNPTSPD07100G pairs a 100 GPH Titanium Signature Series Plus system with an S&B fuel sending unit, so the whole install plugs in. You get the water separator, 2 micron filter and air and vapor separation of a Titanium Signature Plus without building your own pickup in the tank.

  • Fits: 2013 to 2018 Ram 2500 and 3500 with the 6.7L Cummins, and 2019 to 2020 trucks that have the CP3
  • Part number: PNPTSPD07100G
  • Flow: 100 GPH
  • Horsepower rating: stock to 600 hp, per FASS
  • Includes: FASS Titanium Signature Series Plus fuel system and S&B fuel sending unit
  • Filtration: PF-3001 particulate filter on the suction side and XWS-3002 extreme water separator, 2 micron absolute, on the pressure side
  • Warranty: FASS limited lifetime warranty when the system is registered

Why the S&B Sending Unit Matters

The usual lift pump install means a draw straw or a sump in the tank. This kit replaces the factory sending unit with an S&B unit made to feed the FASS. FASS describes it as using active bucket filling: a venturi jet pump keeps the pickup basket full, so the pump keeps drawing fuel even when the tank is very low.

The Plus system has O ring boss fittings, black anodized 6061 aluminum fittings and black fuel line, plus a heat sink on the motor.

This is a new part number from FASS. Call us to confirm fitment for your exact truck and to check availability before you order.

What It Does

A factory lift pump moves fuel and that is all. It does not pull out air, vapor or water. Air in the fuel throws off injector spray and timing, and water is the fastest way to kill a high pressure pump. A FASS system pulls fuel through a particulate filter that catches the larger debris before it reaches the pump, then pushes it through the extreme water separator, which traps the water and filters down to 2 microns absolute. Entrained air and vapor are separated out before the fuel ever reaches the injection pump.

FASS uses a Mass Flow Return design. Fuel the engine does not use goes back to the tank after it has been through the filters, so the fuel in your tank keeps getting cleaned every time you drive. The motor is FASS's quiet Whisper design, and the housing has radiused internal passages instead of sharp 90 degree corners so air is not mixed back into the fuel.

Filters and Cold Weather

The system uses two spin on filters: the PF-3001 particulate filter on the suction side and the XWS-3002 extreme water separator, rated 2 microns absolute, on the pressure side. FASS rates them for about 30,000 miles. The easiest way to keep spares on hand is the FP3000 filter pack with two of each. Want longer cans? The FP3000XL has the extended length XWS-3002XL and PF-3001XL, if you have the room under the housing. If your truck sees real winters, the housing has ports for the HK-1001 electric heater kit.

Not sure which flow rate fits your truck and your power level? Send us your VIN and mods, or call 865 640 2097 and talk to a tech who works on these trucks every day. Comparing brands? Read our FASS vs AirDog lift pump guide.

Recently viewed

Didn't find the product you were looking for?