Overview🔥 Give Your Headlights a New LookTransform your projector headlights with vivid multicolor Demon Eyes. These compact LED accents mount behind the projector lens, creating an aggressive glow that stands...
Transform your projector headlights with vivid multicolor Demon Eyes. These compact LED accents mount behind the projector lens, creating an aggressive glow that stands out at car shows and meets.
Vivid RGBW colors, 2 LEDs per board with dedicated 6500K white LEDs
Adjustable effects, brightness, and speed with a compatible controller
Bluetooth app + handheld remote control when the controller package is selected
Multiple pair options to match your headlight setup
1-year warranty included
Part number: E1
Lighting
🎨 Colors & Control
Choose your color, dial in the brightness, or switch to a dynamic effect for a custom look.
RGBW technology combines red, green, and blue LEDs with a dedicated white chip, giving you a full range of colors plus crisp 6500K white.
Select the Bluetooth controller + remote package if you need a complete control setup. Available effects depend on the controller and product variant selected.
Compatibility
Fits all projector-style headlights only. Demon Eyes illuminate the projector lens and reflector bowl; they do not replace your headlight’s driving beam.
Headlight housings must be opened for installation.
Projector designs vary, so mounting adjustments may be required.
Confirm your projector layout and the number of pairs needed before ordering.
Colored lighting is intended for show and off-road use.
Installation
Estimated installation time: 3–5 hours, depending on the headlights and installer’s experience. Professional installation is recommended.
Open the headlight housings.
Position and secure the Demon Eyes above the projectors.
Route the wiring outside the housings.
Connect the wiring to the compatible controller and power source.
Test operation, then reseal the headlights.
Mounting tip: If the supplied brackets do not fit your projector, a suitable heat-resistant epoxy may be needed. Keep the LEDs clear of moving projector components.